Stands and Storage
Browse used bike stands and storage for sale from riders across the UK. Two different jobs sit here: work stands that hold a bike at working height, usually clamping a round frame tube between 25mm and 42mm or gripping the fork ends, and storage that lifts a bike off the floor on a wall rack, ceiling hoist or floor stand. It suits anyone servicing at home, or fitting more than one bike into a garage, shed or hallway.
What is the difference between a work stand and a bike storage rack?
A work stand holds the bike still while you apply force to it — indexing a rear mech, torquing a bottom bracket, bleeding a brake — so it needs a rigid clamp and a stable base. Storage only has to hold a stationary bike safely for months at a time, which makes fixings and rated hardware the important part rather than clamp strength. Listings often mix the two, so check what a seller is describing.
Which work stand suits a home workshop?
Folding tripods pack away and travel to races; bench-mount and bolt-down stands are more rigid and never move once fitted. Load ratings matter more than they used to, since a 25kg e-bike is beyond what some lightweight folding stands are designed for. The work stands section splits portable and fixed designs.
How do I store bikes in a small flat or garage?
Wall racks hold the bike vertically by a wheel and take the least floor space, ceiling hoists lift it clear on a pulley for bikes you ride seasonally, and floor stands need no fixings at all, which is the answer in rented flats. The bike storage section covers all three, and the choice usually comes down to what you are allowed to drill into.
Is a work stand the same as a truing stand?
No. A work stand holds a whole bike by the frame or forks, while the dished, calipered stands used to tension and true a wheel off the bike live in wheel building. Some riders true a wheel in the frame using brake pads as a reference, but that is a bodge rather than a substitute.
What wears out on used stands and racks?
On work stands, the jaw rubber perishes and glazes, the cam lever stops holding, and the quick-release height collar starts slipping so the stand sinks under load — that last one is the failure that drops a bike. On storage, look for UV-embrittled plastic hooks from shed use, frayed hoist cord, seized pulleys and missing rubber sleeves that leave bare metal against a rim.
What is fair to pay, and when should I buy new?
Complete items with all knobs, feet and brackets present are worth buying; anything missing proprietary hardware usually is not, because those parts are the hard bit to source. Buy new fixings for any wall or ceiling mount regardless of what comes in the box, since plugs and anchors are single-use and a hoist letting go drops a bike from head height.